Ericsson 2217 - Position I, Ext Alarm Interface; Position J, ALD Ctrl Interface; Position K and L, TX Monitor Interface (Optional); Optional Equipment Interfaces

PRELIMINARY
Radio Description
5.7 Position I, Ext Alarm Interface
Two external alarms can be connected to the radio external alarm port.
5.8 Position J, ALD Ctrl Interface
The ALD control (ALD Ctrl) connects an ALD (RET) cable to the radio for
antenna system communication.
5.9 Position K and L, TX Monitor Interface (Optional)
Note: This section only applies to Radio 2217.
The TX monitor interfaces provide the monitoring for the output power and
are shown in Table 17.
Table 17 TX Monitor Cable Connectors
Radio Connectors
TX Monitor Connectors
TX Monitor A SMA Connector
TX Monitor B SMA Connector
5.10 Optional Equipment Interfaces
The equipment presented in this section is optional and can be ordered
separately.
5.10.1 Fan Unit
The Radio 2217 fan unit consists of a replaceable fan tray with three fans.
36
181/1551-LZA 701 6001-1-V1 Uen PC3 | 2016-01-13