Ericsson 4408 - System Characteristics; RF Electromagnetic Exposure; Software; Radio Configurations

10/3/23, 11:57 AM
Radio Description
about:blank
11/20
3.10 System Characteristics
This section describes the system characteristics of the Radio System.
3.10.1 RF Electromagnetic Exposure
For general information about RF EMF exposure, see Radio Frequency Electromagnetic Fields.
The following tables list the compliance boundaries (exclusion zones), outside of which the RF EMF exposure from Street
Radio 4408 is below the limits specified by the FCC and the limits applicable in:
– USA (47 CFR 1.1310)
Table 10 Compliance Distance for General Public (GP) and Occupational (O) Exposure Applicable in USA and Markets
Employing the FCC RF Exposure Limits (Including 0.6 dB Power Tolerance)
Product Standard
Maximum Nominal
Output Power from the
Radio
IEC 62232 Installation
Class
Compliance Distance (m)
GP O
Street Radio 4408 B77G LTE / NR 4 × 5 W E+ 1.6 0.7
(1) The compliance distances are determined for maximum nominal output power with power tolerance and TDD downlink duty cycle included.
3.10.2 Software
For information on software dependencies, see Supported Radio Capabilities.
3.10.3 Radio Configurations
For information about available radio configurations, see Radio Node Configurations.
(1)