5.1.1 Mounting and power
The Gateway 5780 has 2 different power feeding options:
1. Integrated 115/230V AC power is possible with Support Frame 6501
(Ericsson product number KRY 901 345/1) and Gateway 5780 main unit.
I.e. DC input on Gateway 5780 is fed from the Support frame 6501
(including a PSU).
Note: This installation requires external fuse and circuit breaker. The
recommended melting fuse type is gG-gL-gD in accordance with
IEC 60269-1. Circuit breakers must comply with at least Curve 3 tripping
characteristics, in accordance with IEC 60934. Minimum fuse rating 6A.
2. Power over Ethernet (PoE), per IEEE 802.3af.
Note: It is required that fusing and over voltage protection is covered via
the installation of the Power over Ethernet (PoE) injector.
Figure 6 Power alternatives, PoE configured and support 6501 AC-configured
site
The support 6501 is designed to fit both mechanically and electrically together
with Gateway 5780.
The wall plate for either mast or Wall installation option will utilize a simple and
highly integrated mechanical solution.
To Next Page
Loading...