Getting Started
802.11at Cable Specification:
• 100 m maximum length
• Maximum cable pair resistance of 12.5 Ohms, satisfied by using CAT5
or CAT5e as specified by ANSI/TIA/EIA-568 or Class D as specified by
ISO/IEC 11801:1995
• 600 mA maximum current per pair
1.2.3 Reset Button
This button is used to restore the factory default configuration using a paperclip
or pen tip. If you hold down the button for 15 seconds or more, until all of the
LEDs turn off, any configuration changes you may have made are removed,
and the factory default configuration is restored to the AP 6120.
4
1/006 92-LZA 101 810 Uen A | 2013-04-11
To Next Page
Loading...
