Need help?Do you have a question about the Ericsson AP 6120 and is the answer not in the manual?
General| Product Name | Ericsson AP 6120 |
|---|---|
| Category | Wireless Access Point |
| Wireless LAN Standard | IEEE 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz, 5 GHz |
| PoE | Yes |
| Power over Ethernet | 802.3af |
| MIMO Technology | Yes |
| MIMO Configuration | 2x2 |
| Antennas | Internal |
| Ethernet Ports | 2 |
| Antenna Gain | 4 dBi |
| Mounting | Wall, Ceiling |
| Security Features | WPA, WPA2, WPA3, 802.1X |
| Management | SNMP |
Lists the included accessories like Ethernet cable, fastening hardware, and the unit itself.
Describes key components of the AP 6120, including its power connector, internet port, and reset button.
Provides guidelines for choosing the optimal installation location for the AP 6120.
Details the process of mounting the AP 6120 unit onto a flat surface.
Explains how to connect the AP 6120 to power, either via AC outlet or PoE.
Instructs the user to check the unit's LED status after powering on.
Guides the user on how to configure the AP 6120 using its web interface or CLI.
To Next Page
