Tools
3/1531-HSD 101 41 Uen E 2007-08-13
3
2 Tools
Before starting the installation the following tools should be at hand:
Table 1 Tools and Recommended Torque
Item Shape Used for Recommended
Torque
1. Torque-driver
with TORX T08
bit
Power and
subscriber
connectors screws
0.3 Nm
2. Small flat head
screw driver
Opening cover for
and setting the DIP
switch of the
ESN212
-
3. Torque-driver
with TORX T30
bit
Screws (M6x16 mm)
for fastening units
and subracks to the
cabinet
10 Nm
4. Side-cutting
pliers
Cutting cable ties
-
5. Band tensioner
Tensioning cable ties
-
Apart from the tools some cable ties for fastening of the cables are needed.
The cable ties are not delivered with the equipment.
To Next Page
Loading...