IndexIndex
Syntax
disconnect vlan <vlan> {ethernet_port <port>|host-port}
disconnect ethernet_port <port>
disconnect host-port
Arguments:
vlan <vlan> – Set the number of the Switching Domain. Range 1 to
200.
ethernet_port <port> - Set the number of the Ethernet port. Range
1 to 26.
host_port - The port between the network processor essentially
working at level 2 and the host processor working at layer 3 and higher
layers.
Default Setting
None.
Example:
efn# disconnect vlan 2 ethernet_port 2
efn# disconnect ethernet_port 2
13.8.8 set bandwidth_limitation
Use this command to define bandwidth limitation profiles. The command
reset bandwidth_limitation will reset to default values.
Syntax
set bandwidth_limitation <type>
[bandwidth <bandwidth>]
[burst_tolerance {<burst_tolerance>|auto}]
Arguments:
<type> - none, predefined profiles index, range 1 to 8 (which can be
modified by the user), or user-defined profiles, range 9 to 32.
To Next Page
Loading...