Glossary
<bandwidth> – The bandwidth limit in kbits/s.
<burst_tolerance> – The burst tolerance in ms or auto (for automatic
calculation, see below). Range 1 to 40 000 and auto.
Default Settings
Resource Bandwidth
limit
[kbps]
Minimum
Burst tolerance
[millisecond]
bandwidth_limitation 1 500 40 000
bandwidth_limitation 2 1 000 20 000
bandwidth_limitation 3 2 000 10 000
bandwidth_limitation 4 5 000 4 000
bandwidth_limitation 5 10 000 2 000
bandwidth_limitation 6 25 000 800
bandwidth_limitation 7 50 000 400
bandwidth_limitation 8 100 000 200
Bandwidth_limitation 9 - 32 0 auto
Command Usage
The command is used to define a bandwidth limitation profile that is used
when connecting a port to a switching domain, see section 13.8.23 on page
141.
Note that for profiles 9 to 32, no default bandwidth is configured. If these
profiles are used without configuring bandwidth, all traffic on the connection is
discarded.
When setting other bandwidth limits the ‘auto’ alternative for burst tolerance it
is recommended. At ‘auto’ the burst tolerance is calculated as 20 000 kilobits
divided by configured bandwidth limit.
Example: bandwidth 10 000 kbits/s, burst tolerance = 20 000 kilobits/10 000
kbps = 2 s = 2000 ms.
To Next Page
Loading...