IndexIndex
Command Description Page
connection_flo
w
connection_flow node_level flow <*/[1-4]> - displays the
status of the connection flows.
114,
121
Cpu
Display basic IP parameters.
mac_address – The MAC address of the node.
uptime – Time in days since last restart.
users – Number of CLI users logged in.
ipsec_status – Specifies if IPSec is enabled or disabled.
124
ethernet_port
Display the configured parameters for the Ethernet port.
actual_duplex – Full or half, determined by auto-negotiation.
actual_speed – 10 or 100, determined by auto-negotiation.
auto_negotiation_complete – yes or no, auto-negotiation
process completed.
auto_negotiation_link_partner – yes or no, depending on
whether the link partner has autonegotiation or not.
disabled_by - Undefined or spanning tree if port is disabled by
spanning tree.
egress_connections - All switching domains connected for
outgoing traffic.
ingress_connections – Switching domains connected for
incoming traffic.
ip_destinations – IP-address, single or a range.
link - Up or down.
type - Gigabit or Fast Ethernet.
114,
126
filter_profile
Display defined filters profiles. 129
global_filter
Display defined global profiles. 130
host_accesslist
Display hosts that are allowed to access the management
interfaces.
108
host_port
Display the host port, that is the Ethernet internal interface
between the network and the host processors.
egress_connections - list of egress connections, including
attributes.
ingress_connections - list of ingress connections, including
attributes.
Log Display the error_logger, packet_logger and trace_logger.
This information is useful in debugging situations when
submitting trouble reports. See section 13.10.1 on page 158 for
details on viewing the packet_logger results.
158,
160
To Next Page
Loading...