Glossary
Command Description Page
main_board
Display information about the main board.
name – For example, 1.
product_number – For example, ROA1178565.
serial_number – For example, 59.
temperature - Current temperature of the board (°C).
152
network_pro-
cessor
Display information about the current layer 2 switching table of
the node. The bridging table is managed by the network
processor. It is re-built after restart.
ethernet_port - Entries depending on Ethernet Port.
ip_address - Entries depending on IP Address.
mac_address - Entries depending on MAC Address.
-
node_control
Displays the global parameters, set in set node_control.
network_element_id
relay_agent_eda_ip
relay_agent_eda_sid
vmac_address_node_id
132
rapid_span-
ning_tree
Display the defined Rapid Spanning Tree (RSTP) parameters.
bridge_id - Status.
designated_root - ID for designated switch of the LAN segment
ports – The RSTP status of the port (learning / forwarding /
blocked).
root_path_cost - Cost of path from own switch to Master switch.
root_port_id - ID of port connected to Master switch.
time_since_topology_changed - Status.
topology_change - True or False.
topology_change_count - Number of changes.
135
real_time_clock
Display parameters for using the Network Time Protocol. 136
running_config
Display or save all the configuration data from ELN/EFN.
To Next Page
Loading...