5.1 Installation Procedure
Installation follows normal Windows procedures. Microsoft .NET
TM
3.5 or later
needs to be installed on the machine. If missing, a prompt will inform the user
during the installation process to install the .NET Framework.
The installation can be done both in interactive and silent mode to enable
installation without user interaction.
5.2 Wireless Manager
The Wireless Manager is accessed from the Windows Desktop or via Start |
Programs| Wireless Manager. Preferences can be set to automatically
switch the radio transmitter on and to make a connection.
A Wireless Manager icon is placed in the Windows notification area at the
bottom right of the screen. Set the “Minimize to notification area” option in
Wireless Manager to only show an icon in the Windows notification area if the
Wireless Manager Status window is minimized
To open the Wireless Manager, right-
click the Wireless Manager icon to
access a menu and select “Open
Wireless Manager”. Select “Exit” to quit
the Wireless Manager.
The Windows NDIS icon indicates an active connection and data flow. The
total connection time and transmit and receive byte count is also shown in the
Wireless Manager.
5.2.1 Status Display
Wireless Manager opens to a status window which provides network and
connection information.
To Next Page
Loading...
