The network operator's and the host device manufacturer's logos can be
customized in the application. Connection duration, connection mode, volume
of data and an indication of the signal strength are provided in the Wireless
Manager window while connection is active. The figures provide an
approximate checkpoint of the data volumes. Please note that the information
shown here is not guaranteed to match the mobile operator’s bill.
5.2.2 Settings
Settings are presented in logical groups. Connection settings are automatically
set up each time a new SIM card is inserted into the host device. The Wireless
Manager contains a list of many operator settings. The home operator on the
SIM is matched with this list and a default connection profile is automatically
created.
The settings may be viewed and edited. Alternative settings can be manually
entered or selected from a database covering many mobile operators.
5.2.2.1 Connection Configuration
When a new SIM card is detected by F5521gw, the Wireless Manager
identifies the home network and automatically creates a connection profile
from a pre-loaded list of operator settings. This becomes the default profile
and is available immediately. Therefore, in most cases, the user does not
need to do anything except click the Connect button to establish a connection.
To Next Page
Loading...
