EasyManua.ls Logo

Ericsson G32 - User Manual

Ericsson G32
80 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Ericsson G32 / G36
Fixed Wireless Terminal for GSM/EDGE Mobile Networks
User Guide

Table of Contents

Questions and Answers

  • J
    Jeffery BallAug 11, 2025
    What to do if the Ericsson G32 power LED is red and the radio LED is green or flashing?
    • M
      Mrs. Mary Ramos DDSAug 11, 2025
      If the power LED is red and the radio LED is either green or flashing on your Ericsson Touch terminal, first ensure that the AC power cords are properly connected to the AC power outlet. Also, verify that the power cable is securely connected to the FWT (Fixed Wireless Terminal). Finally, check the circuit breaker or fuse for the AC electrical circuit that supplies power to the AC input of the FWT power supply.
  • C
    Carl WatsonAug 21, 2025
    What to do if Ericsson G32 power LED is red and radio LED is off?
    • S
      Shannon AyalaAug 21, 2025
      If the power LED is red and the radio LED is off on your Ericsson Touch terminal, ensure the AC power cord is securely connected to the AC power outlet. Next, check that the power cable is connected to the FWT. Lastly, inspect the circuit breaker or fuse for the AC electrical circuit that supplies power to the AC outlet to which the FWT is connected.
  • J
    josephburgessAug 31, 2025
    What to do if Ericsson G32 Touch terminals power LED is green but radio LED is off?
    • M
      Matthew DavisAug 31, 2025
      If the power LED is green but the radio LED is off on your Ericsson Touch terminal, first verify that the antenna is properly installed. Then, ensure you have installed the FWT in the best location and that the antenna is correctly connected.

Ericsson G32 Specifications

General IconGeneral
BrandEricsson
ModelG32
CategoryTouch terminals
LanguageEnglish

Related product manuals