Web-based Configuration
Fixed Wireless Terminal: G32 and G36 models 57
Dial Speed Setup
This setting allows you to adjust the dialing speed (interval between digits).
There are five possibilities. By default, this functionality is set to Normal.
Minute minder
Indicates if the minute minder is active or not. By default, this functionality
is set to Deactivated.
Call Setup
Define the bearer capability by default for all calls if no indication is done.
Allowed parameters are:
• Speech
• Fax
• Circuit switched data
This is a useful function when dedicated voice-only, fax-only or data-only
lines are simulated with the FWT.
By default, this functionality is set to Speech.
Pre-defined B-number/bearer capabilities
These settings define five specific B-numbers (Destination numbers) along
with a predetermined bearer capability. This feature is useful for those
applications in which fax and data calls have to be sent to a specific
destination and the terminal equipment does not send the correspondent
Fax CNG or Data CNG tone.
Each number is defined with the following two settings:
• Destination number —the number that has a bearer capability
associated. Up to 20 character-numbers can be programmed.
• Bearer capability- the bearer capability associated to a
destination number. This bearer capability can be voice, fax or
circuit-switched data.
To Next Page
Loading...