Technical Data
64 Fixed Wireless Terminal: G32 and G36 models
FWT Interfaces
Basic Kit
The Basic Kit consists of: FWT unit, power supply, mains cable, wall-
mount bracket, antenna, Quick Installation Guide and User Guide manuals
and telephone cable.
• Size: Height 148 mm, Width 165 mm
• Depth: 45 mm
• Weight: 310 grams
• SIM card: Small plug-in card, 1.8V or 3V type
Telephone Interfaces
• Telephones: RJ11 (a/b 2-wire line); telephone interface
• Analog Fax: Group 3 Fax transmission
• Analog Data: V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.23,
V.21, Bell 212A & 103
• CLI: ETSI DTMF and V.23; Bellcore FSK
• Line Impedance: 600 ohm (default)
• Loop Current: 25 mA (off-hook)
• Open loop voltage: 48 V (on-hook)
• Loop resistance: < 650 ohm (off-hook)
• Ringing voltage: 45 Vrms
• Ring Load: 3 REN; up to 3 telephone devices
• Call Control signaling; polarity reversal and loop-break (G36
only)
USB Interface
• USB 1.1 (mini-B female)
• Data services: all applicable GSM 7.07 AT commands
• SMS: all applicable GSM 7.05 AT commands
GSM Antenna
• SMA plug-female (50 ohm)
To Next Page
Loading...