PRELIMINARY
Technical Description
MINI-LINK CG is compatible with MINI-LINK 6351 2.4 and later.
MINI-LINK CG can combine radio link planning data and transport planning
data to generate one common CLI configuration script. This enables an
installation technician to configure each NE by deploying the script, rather than
by performing configurations step-by-step in a graphical user interface.
MINI-LINK CG takes Network Configuration Files (NCFs) as input and
generates CLI scripts for the NE included in the NCF. An NCF is an XML
document that is compliant with a certain XML schema, called the NCF
schema. MINI-LINK CG can also combine planning data in the NCF format with
templates, and then merge and convert the NCFs to create deployable CLI
configuration scripts for selected sites and NEs.
MINI-LINK CG provides offline validation to reduce configuration errors and
does not need connect to the NE to create the configuration scripts
The configuration scripts generated by MINI-LINK CG can be deployed to
separate NEs through SOEM, through a CLI session, or by placing them on the
RMMs in the packet radio (see
Section 7.3.3 on page
41).
Integrate and create
CLI Scripts
MINI-LINK Configuration Generator (CG)
Microwave Planning
Transport Planning
MINI-LINK
MINI-LINK
Network/site
engineer
Integration
engineer
CLI Script Distribution
NCF Interface (XML)
File-based Network
Rollout
Installation
technician
Network
operator
Planning and Export
15804
Figure 23 MINI-LINK CG Overview
For further information about MINI-LINK CG, see MINI-LINK CG documentation.
40
1/22102-HRA 901 17/9 Uen PU1 | 2016-07-04
To Next Page
Loading...
