PRELIMINARY
Accessories
8 Accessories
The packet radio product program contains a number of accessories for
installation and operation. This section gives additional technical information
for some accessories.
8.1 Power Over Ethernet
One electrical Ethernet cable can supply the packet radio with Ethernet
payload, in-band DCN, and DC-power when using the Power Over Ethernet
(PoE) accessories.
The equipment used for PoE support is the following:
• PoE injector, for either AC or DC power supply
• Pole mounting kit (optional)
• PoE cable
Figure 24 PoE Overview
8.1.1 PoE Injector
The PoE injector merges the Ethernet payload and the input power on to the
wires in the electrical Ethernet cable. It also provides overvoltage protection
towards the indoor parts, the power supply, and the Ethernet interface. The
PoE injector supports one packet radio and can be mounted on a wall or in a
mast using an optional pole mounting kit.
51
1/22102-HRA 901 17/9 Uen PU1 | 2016-07-04
To Next Page
Loading...
