Install RBS
Note
Before installing the RBS on a ceiling, the fan unit must first be
installed on the RBS. See Appendix B for more information.
DRILLING TEMPLATE / QU
ICK GUIDE
Ge7233B
1. Put the drilling template on the ceiling and ensure that it is straight.
Make sure that the entire drilling template fits on the ceiling without it
folding around any corners.
Ge7119A
2. If applicable, drill the three holes marked on the drilling template.
Ge7105
3. Attach the two upper screws in positions to hang the mounting
bracket.
Ge7106
4. Hang the mounting bracket on the two screws.
16
56/1531-LZA 701 6001 Uen D | 2015-11-06
To Next Page
Loading...
