Ericsson RBS 6402 - Cover and Cable Attachment; Appendix B: Install Fan Unit; Fan Unit Installation Procedure

Appendix B: Install Fan Unit
4 Appendix B: Install Fan Unit
Ge7450A
1. Insert the fan cable through one of the grids on the top of the RBS.
Ge7451A
2. Pull the cable out from underneath the connector board, at the
same time bring the fan unit to the top of the RBS.
Ge7452A
click
click
3. Attach the fan unit to the RBS.
Ge7453A
4. Connect the fan cable to the port.
19
56/1531-LZA 701 6001 Uen D | 2015-11-06