Install RBS
Ge7457A
3. Remove the front cover.
Ge7456B
4. Break the relevant antenna cable knock outs in the back cover
with a screwdriver. Make sure that the edges of the knock-out holes
are smooth.
Ge7458B
5. Remove the internal antenna by first removing the plugs.
Ge7459B
6. Insert the tool to unhook the antenna from the RF circuit board.
Ge7460B
7. Detach the internal antenna from the RF circuit board.
Ge7461B
8. Insert the external antenna kit in the same way as the internal
antenna, at the end of the RF circuit board.
22
56/1531-LZA 701 6001 Uen D | 2015-11-06
To Next Page
Loading...
