erlab Captair Smart 392

Need help?

Do you have a question about the erlab Captair Smart 392 and is the answer not in the manual?

Summary

General Information

Safety Notices

Crucial safety guidelines and recommendations for correct and safe operation of the fume hood.

Unit Setup and Calibration

Calibrating the Electronic Anemometer

Step-by-step instructions for calibrating the anemometer to ensure accurate airflow readings.

Control Module and Alarms

Alarm Management and Signals

Explanation of different alarm types, their causes, and how to manage them effectively.

Accessing the Administrator Interface

Administrator Interface Overview

Status Page Details

Comprehensive breakdown of the information presented on the administrator interface's status page.

Administrator Interface Settings

Device and Network Settings

Configuration options for device time, date, network mode, IP, hostname, and gateway.

Filter and Sensor Settings

Details on configuring filter saturation alarms, sensor sensitivity, and replacement dates.

Filter Saturation Testing Procedures

Colorimetric Tube Saturation Test

Procedure for testing filter saturation using colorimetric tubes and acetone as a tracer.

PID Device Saturation Test

Molecode S Sensor Saturation Test

Filter Replacement Procedures

Replacing HEPA;ULPA Filters

Guidance on protective measures, prerequisites, and a step-by-step process for HEPA/ULPA filter replacement.

Cleaning and Maintenance Guide