erlab Captair Smart 714 - User Manual

Safer
Simpler
Captair Smart
Ductless filtering fume hoods
User
manual

Summary

General Information

Safety Notices and Precautions

Product Registration and Warranty

Unit Start-up Procedure

Calibrating the Electronic Anemometer

Step-by-step guide for calibrating the unit's air flow sensor.

Control Module Overview

Understanding Alarm Signals

e-Guard App Introduction

Connectivity Principle Explained

Illustrates the system architecture and data flow for remote monitoring.

Connection Options

Accessing Administrator Interface

Direct Computer Connection Steps

Step-by-step instructions for establishing a direct connection to the unit.

Entering Compatible Network Parameters

Guide on inputting specific IP address and subnet mask details.

Browser Validation of IP Address

Final step to open the web browser and confirm connection to the unit's interface.

Administrator Interface Detailed Description

Filter Saturation Alarm Configuration

Setting up the Molecode sensor sensitivity and alarm parameters.

Fan Setpoints by Filtration Configuration

Acetone Filter Saturation Testing

Saturation Test with Colorimetric Tubes

Procedure for using colorimetric tubes to test molecular filter saturation.

PID Device Filter Saturation Test

Molecode S Sensor Filter Saturation Test

Replacing the Units Filters

HEPA;ULPA Filter Replacement Prerequisites

Essential preparation steps and safety measures before replacing HEPA/ULPA filters.

Required Personal Protective Equipment

Specifies the minimum safety gear needed for filter replacement tasks.

The Revolving Filter System

Filter Replacement Disconnection Steps

Safely Switching Off the Fume Hood

Instructions for powering down the unit before performing maintenance.

Filter Column Configurations (321-481 Models)

Filter Column Configurations (392-714 Models)

Filter Storage and Usage Recommendations

Filtration Breakthrough Sensor Replacement Frequency

Cleaning and Maintenance Procedures

erlab Captair Smart 714 Specifications

General

Type	Ductless filtering fume hood
Filtration	HEPA/ULPA or Activated Carbon
Power Supply	230V
Voltage	230 V
Frequency	50/60 Hz
Airflow Rate	0.4 m/s
Power Consumption	35 W
Filter Type	HEPA/ULPA or Activated Carbon