ERNITEC 1500M - Page 13

Auto panning (BDR-575 and ICU only)
To start auto panning, press:
AUTO
ðð
Start auto panning
Call Preposition (not available on Series BDR-51X)
To call preposition number 3, press:
3
ðð
Call preposition number 3
Note: Valid range BDR-55X and ICU: 1-30, BDR-575: 1-126.
Start Sequence of pre-positions
To start the pre-programmed sequence of pre-positions, press:
Start sequence.
The sequence of pre-positions is automatically aborted when
another function is operated.
Remove/insert text (Series BDR-550 only)
Remove/insert the text generated by the currently controlled telemetry receiver:
?
150XM
Remove or Insert text from
telemetry receiver
Auto focus (ICU only)
In order to switch to auto focus, press:
AUTO
ðð
or
AUTO
ðð
Enable auto focus
Auto iris (ICU only)
In order to switch to auto iris, press:
AUTO
ðð
or
AUTO
ðð
Enable auto iris
Installation and Setup instruction for Keyboard Series 1500
Page 13