3. BEFORE INSTALLATION
3.1 Handling of the unit
The angle of inclination should not be more than 15º when carrying the unit in case of overturn of the unit.
a. Rolling handling: several rolling rods of the same size are placed under the base of the unit, and the length of each rod must be
more than the outer frame of the base and suitable for balancing of the unit.
b. Lifting: each lifting rope (belt) should be able to bear 4 times the weight of the unit. Check the lifting hook and ensure that it is firmly
attached to the unit. To avoid damages to the unit, a protective block made of wood , cloth or hard paper should be placed between the
unit and rope when lifting, and its thickness should be 50mm or more. It is strictly forbidden to stand under the machine when it is
hoisted.
Fig. 3-1 lifting of the unit
Lifted cable
4 protective blocks should be placed.
Unila
teral distance should be 50mm or more.
the angle of inclinaton
the angle of inclinaton
Lifted hook
3
To Next Page
Loading...