ersa ANALOG 60 - User Manual

1
Betriebsanleitung • Operating instructions
ERSA ANALOG 60 / 60 A
ERSA ANALOG 80 / 80 A
Mode d’emploi • Инструкция по эксплуатации
Manuale di istruzioni • Instrucciones de manejo
Elektronisch temperaturgeregelte Lötstation
Electronically temperature controlled soldering station

Summary

Before Initial Operation

Initial Operation

Soldering

Working with Sensitive Components

Replacement of Soldering Tips

Fault Diagnosis

Heating Element Replacement Basic Tool 60

8.1 Continuity Check for Heating Element (fig. 5)

Check continuity of the heating element for Basic tool 60.

8.2 Heating Element Replacement;Replacement of Lead (fig. 6)

Replace heating element or lead for Basic tool 60.

Heating Element Replacement Ergo Tool

9.1 Continuity Check for Heating Element (fig. 7)

Check continuity of heating element for Ergo tool.

9.2 Heating Element Replacement; Replacement of Lead (fig. 8)

Heating Element Replacement Basic Tool 80

10.1 Continuity Check Heating Elem. (fig. 10)

10.2 Continuity Check for Thermocouple

10.3 Heating Element Replacement; Replacement of Lead (fig. 11)

Heating Element Replacement Power Tool (fig. 13)

11.1 Continuity Check for Heating Element (fig. 13)

11.2 Continuity Check for Thermocouple

11.3 Heating Element Replacement; Replacement of Lead (fig. 14)

Technical Data; Order Number

ersa ANALOG 60 Specifications

General

Brand	ersa
Model	ANALOG 60
Category	Soldering Gun
Language	English