Need help?Do you have a question about the ersa RDS 80 and is the answer not in the manual?
General| Power | 80 W |
|---|---|
| Temperature Stability | ±2 °C |
| Display | Digital |
| Voltage | 230 V |
| Cable Length | 1.5 m |
| Temperature Range | 50 - 450 °C |
Welcomes the user and introduces the RDS 80 soldering station for various applications.
Details the technical specifications of the RDS 80 electronic station, including power and dimensions.
Provides technical details for the RT 80 soldering iron and RH 80 holder.
Covers safe usage, component checks, and restrictions on unauthorized access.
Addresses fire prevention, workplace tidiness, and handling of lead solder.
Details ventilation needs, cable protection, and compliance with regulations.
Instructions for checking package contents and initial setup before powering on.
Step-by-step guide for safely powering on the soldering station for the first time.
Explains how to switch on the station and use the basic temperature adjustment buttons.
Describes pre-programmed temperatures, changing them, and manual standby features.
Details time-controlled standby and automatic power-off modes for energy conservation.
Describes disabling the power bar graph, unit switching (°C/°F), and the calibration process.
Discusses ESD safety, potential equalization, and soldering tip replacement and cleaning.
Guides users through common issues like power, fuse, and connection problems.
Explains how to check the heating element's continuity and replace the soldering iron if defective.
Outlines crucial maintenance tasks for the soldering tip and station for optimal performance.
Lists available spare parts and optional accessories with their order numbers.
Illustrates various ERSA soldering tips, including standard and reinforced types.
Details the warranty coverage, exclusions for wear parts, and procedures for claims.
To Next Page
