ersa IR 650 A - Table of Contents

Operating Instructions
ERSA IR / PL 650 A
ERSA IR / PL 650 A / Page 2 Document 3BA00143 Rev.2
Contents
1. Introduction 4
1.1 General product information 4
1.2 General information about the operating instructions 4
1.3 Proper use 5
2. Technical data 6
2.1 IR 650 A basic unit 6
2.2 ERSA PL 650 A 7
3. Safety instructions 8
3.1 Aggregates and interfaces 8
3.2 Safety instructions for handling the system 11
4. Transport, storage, assembly, and disposal 12
4.1 Scope of supply 12
4.2 Transport and storage 12
4.3 Assembly 13
4.3.1 Setting up the system 13
4.3.2 Mechanical connections 14
4.3.2 Electrical connections 15
4.4 Disposal 16
5. Commissioning 17
5.1 Switching on for the first time 17
5.2 IRSoft installation 17
6. Function description 18
6.1 The IRSoft user Interface 18
6.2 Device controls 19
6.2.1 IR 650 A 19
6.2.2 PL 650 A 19
6.3 Parameter Window 20
6.3.1 Current profile parameters 20
6.2.3 RPC 650 A 20
6.3.2 Measured value and threshold value sensors 21
6.3.3 Specifying threshold value functions 21
6.3.4 System settings 21
6.3.5 The status display 22
6.3.6 The information window 22
6.4 Profile settings 23
6.4.1 Setting the profile parameters 23
6.4.2 Setting the heating element configuration 24
6.4.3 Saving, loading, and managing profiles 24
6.5 Desoldering a component 26
6.6 Placing the component and soldering 28
6.7 The optimal profile 31
7. Troubleshooting 33
8. Maintenance 34
8.1 Cleaning 34
8.1.1 IR 650 A 34
8.1.2 PL 650 A 34
8.2 Replacing a silicon suction cup on the IR 650 A 34
9. Spare parts and wearing parts 35
9.1 ERSA IR 650 A 35
9.2 ERSA PL 650 A 36