8 ORDERING SPARE PARTS
0463 348 001
- 12 -
© ESAB AB 2017
8 ORDERING SPARE PARTS
CAUTION!
Repair and electrical work should be performed by an authorised ESAB service
technician. Use only ESAB original spare and wear parts.
The COOL2 is designed and tested in accordance with International and European
standards IEC/EN 60974-2 and IEC/EN 60974-10, Canadian standards
CAN/CSA-E60974-1 and US standards ANSI/IEC 60974-1. On completion of service or
repair work, it is the responsibility of the person(s) performing the work to ensure that the
product still complies with the requirements of the above standards.
Spare parts and wear parts can be ordered through your nearest ESAB dealer, see the back
cover of this document. When ordering, please state product type, serial number, designation
and spare part number in accordance with the spare parts list. This facilitates dispatch and
ensures correct delivery.
To Next Page
Loading...