4 INSTALLATION
0463 348 001
- 8 -
© ESAB AB 2017
4 INSTALLATION
The installation must be carried out by a professional.
CAUTION!
This product is intended for industrial use. In a domestic environment this product
may cause radio interference. It is the user's responsibility to take adequate
precautions.
4.1 Location
Position the cooling unit such that it's cooling air inlets and outlets are not obstructed.
4.2 Power supply
The cooling unit is supplied from the power source, see the"OPERATION" chapter.
4.3 Installing welding equipment
Installation instruction for this product can be
found in the "ASSEMBLY INSTRUCTIONS"
chapter".
To Next Page
Loading...