Need help?Do you have a question about the ESAB LAF 1250 and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Output Current | 1250 A |
| Rated Output Voltage | 44 V |
| Duty Cycle | 100% at 1250 A |
| Power Factor | 0.93 |
| Protection Class | IP23 |
Covers user familiarity, responsibilities, workplace safety, PPE, and general precautions.
Explains LAH/LAE to LAF conversion using a kit.
Notes that conversion does not change technical data.
Emphasizes installation must be executed by a professional.
Detailed steps for converting the LAH 630 model.
Steps for converting LAE 800/1000 models.
Steps for converting LAE 1250/1600 models.
Steps to verify the welding power source after conversion.
Details connecting the control box and cables for SAW.
Details connecting cables, gas hose, and water hoses for MIG/MAG.
Caution to read safety information before operating the machine.
Details the adapter for LAF 630 and its ordering number.
Guidance on ordering spare parts, specifying machine type and part number.
To Next Page
