Need help?Do you have a question about the ESAB LAF 1000 and is the answer not in the manual?
General| Output Current | 1000 A |
|---|---|
| Duty Cycle | 100% at 1000 A |
| Input Frequency | 50/60 Hz |
| Open Circuit Voltage | 65 V |
| Cooling System | Water Cooled |
| Protection Class | IP23 |
| Welding Process | Submerged Arc Welding (SAW) |
| Rated Output | 1000 A / 44 V |
Overview of the LAF 1000/1000M remote-controlled 3-phase welding power sources.
Specifications for LAF 1000 and LAF 1000M welding power sources, including voltage, current, and dimensions.
Guidance that installation must be executed by a professional.
Instructions for safe unpacking and positioning of the welding power source, including tipping risk.
Detailed steps for connecting the welding power source, including mains and control cables.
Information on the PC board, DIP switches, and welding power source program settings.
General safety regulations for handling the equipment and notes on usage.
Description of the front panel controls including main switch, indicating lamps, and pushbutton.
Procedure for starting up the welding power source, connecting cables and setting parameters.
Note regarding warranty voidance if unauthorized repairs are attempted during the warranty period.
Instructions for cleaning the welding power source, including warnings about blocked inlets and using compressed air.
To Next Page
