ESAB Origo Feed 302N P0 User Manual

Origo™ Feed 302N P0
Alimentador de arame para soldagem
MIG (GMAW) e arames tubulares (FCAW)
Manual do Usuário e peças de reposição
Referência
OrigoFeed 302N P0 0402503
0216039 052014 Válido para n° de série a partir de A10360033
A ESAB se reserva o direito de alterar as especificações sem prévio aviso.
PT

ESAB Origo Feed 302N P0 Specifications

General

Brand	ESAB
Model	Origo Feed 302N P0
Category	Welding System
Language	English

Summary

Safety

Personal safety equipment

Recommendations for personal safety equipment and clothing to wear during operation.

General precautions

General safety precautions for electrical connections and fire safety.

Introduction

Technical Data

Controls and Connectors

Front panel

Description of controls and connectors on the front panel of the wire feeder.

Side console

Identification of components on the side console.

Rear panel

Details of connections and components on the rear panel.

Dimensions

Installation

Receiving

Instructions for receiving and inspecting the wire feeder for transport damage.

Working area

Considerations for selecting a suitable and safe working area for operation.

Installation of the wire feeder

Steps for connecting the wire feeder, welding cable, and gas hose.

Operation

Maintenance

Recommendations

Maintenance recommendations, including cleaning and checking electrical connections.

Fault Tracing

Ordering Spare Parts

Set of Cables

Welding Guns

Accessories

Electric Diagram

Warranty

Appendix A Spare Parts