Need help?Do you have a question about the ESAB Origo Feed 3004 and is the answer not in the manual?
General| Mains Frequency | 50/60 Hz |
|---|---|
| Output Current Range | 30-300 A |
| Duty Cycle | 60% at 300 A |
| Number of phases | 3 |
| Enclosure class | IP23 |
| Wire Diameter Range | 0.8 - 1.2 mm |
Lists the items supplied with the wire feed unit.
Details the different control panels available (MA23, MA24).
Instructions for safely lifting and mounting the wire feed unit.
Explanation of all connection ports and control devices.
Information on connecting the water cooling system and its detection feature.
Guide to setting and verifying correct wire feed pressure.
Step-by-step instructions for replacing wire in the Feed 3004.
Step-by-step instructions for replacing wire in the Feed 4804.
Procedure for changing feed rollers on the Feed 3004 model.
Procedure for changing feed rollers on the Feed 4804 model.
Recommended inspection and cleaning steps for the unit.
Lists part numbers for units, spare parts, and instruction manuals.
Identifies and lists wear parts for both Feed 3004 and Feed 4804.
To Next Page