Need help?Do you have a question about the ESAB Origo Mig C141 and is the answer not in the manual?
General| Output Current Range | 30 - 140 A |
|---|---|
| Fuse (slow) | 16 A |
| Enclosure Class | IP 23 |
| Rated Input Current | 16 A |
| Wire Diameter | 0.6 - 1.0 mm |
| Protection Class | IP 23 |
| Power Supply | 1 Phase |
| Wire Feed Speed Range | 2 - 12 m/min |
Details about the welding power sources' type and model designations.
Outlines essential safety measures for operating the equipment.
Specifies required PPE and conditions for the work area.
Details critical warnings for electric shock, fumes, arc rays, fire, noise, and malfunctions.
Procedures for connecting the equipment to the power supply.
Identifies and explains front panel controls and connection points.
Recommended checks for common faults before contacting service.
To Next Page
