Need help?Do you have a question about the ESAB Origo Mig C340 PRO and is the answer not in the manual?
General| Output Current Range | 30 - 340 A |
|---|---|
| Duty Cycle at 340 A | 40% |
| Protection Class | IP 23 |
| Power Supply | 3-phase |
| Wire Diameter Range | 0.8-1.2 mm |
| Welding Output at 40% Duty Cycle | 340 A |
| Welding Output at 60% Duty Cycle | 280 A |
Lists the components supplied with the Origo™ Mig C280 PRO and Mig C340 PRO welding power sources.
Proper placement of the welding power source to ensure adequate ventilation and accessibility.
Step-by-step instructions for assembling the welding unit's components.
Procedures for safely connecting the unit to the electrical mains supply.
Details on voltage, fuses, and earth connections for the power supply.
Identification and function of all control panel elements and input/output connections.
Understanding the thermal overload cutout and its automatic reset feature.
How to adjust inductance for optimal weld characteristics and reduced spatter.
Guidance on changing polarity for different wire types and welding processes.
Correctly setting wire feed roller pressure to ensure smooth and consistent wire feeding.
Step-by-step guide for loading and replacing welding wire.
Routine checks and cleaning for power source and welding gun to ensure optimal performance.
To Next Page