Need help?Do you have a question about the ESAB Origo Mig 502cw and is the answer not in the manual?
General| Input Voltage | 400 V |
|---|---|
| Output Current Range | 30 - 500 A |
| Mains Voltage | 400 V |
| Number of Phases | 3 |
| Mains Frequency | 50/60 Hz |
| Enclosure Class | IP23 |
| Application | MIG/MAG welding |
| Power Supply | 3-phase |
| Wire Diameter Range | 0.8-1.6 mm |
| Duty Cycle | 60% at 500 A |
Covers operator familiarity, workplace suitability, and personal safety equipment.
Lists the items included with the power source.
Details how to position the welding power source to ensure proper airflow.
Describes the steps for assembling the various parts of the welding unit.
Explains correct connection to mains voltage and fuse requirements.
Identifies and describes the various connection points and control devices on the unit.
Explains the thermal overload trip mechanism and indicator lamp.
Details water cooling system connections and pump activation.
Describes the function of the water flow guard and its indicator.
Guides on regular checks, cleaning procedures, and the use of compressed air.
Provides instructions for checking and topping up the coolant level.
Presents detailed electrical schematics of the welding power source.
Illustrates connection diagrams for different voltage inputs.
Lists ordering numbers for different models and configurations.
Details available accessories, their descriptions, and part numbers.
Provides contact details for ESAB's global network of subsidiaries and representative offices.
To Next Page