Why is my ESAB Origo Mig 4002cw Welding System's welding performance poor?
If you are experiencing poor welding performance with your ESAB Welding System, verify that the welding current supply and return cables are correctly connected. Also, ensure that you are using the correct welding wires, and that the correct current value is set. Finally, check the main power supply fuses.
What to do if the thermal overload trips operate frequently on my ESAB Origo Mig 4002cw?
If the thermal overload trips operate frequently on your ESAB Welding System, start by checking to see whether the air filters are clogged. Also, make sure that you are not exceeding the rated data for the power source; the unit should not be overloaded.
What to do if the welding current is interrupted during welding with my ESAB Origo Mig 4002cw Welding System?
If the welding current is interrupted during welding with your ESAB Welding System, check whether the thermal overload trip has operated (indicated by the orange lamp on the front). Also, check the main power supply fuses.
How to troubleshoot no arc on ESAB Welding System?
If there is no arc on your ESAB Welding System, first check that the mains power supply switch is turned on. Then, check that the welding current supply and return cables are correctly connected, and that the correct current value is set.
General| Brand | ESAB |
|---|---|
| Model | Origo Mig 4002cw |
| Category | Welding System |
| Language | English |
To Next Page