Need help?Do you have a question about the ESAB Origo Mig 4004i A44 and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Mains Voltage | 3 x 400 V |
| Input Frequency | 50/60 Hz |
| Output Current Range | 30 - 400 A |
| Setting Range | 30 - 400 A |
| Efficiency | 85 % |
| Enclosure Class | IP23 |
| Cooling | Forced Air |
| Duty Cycle | 60 % |
| Protection Class | F |
| Standards | EN 60974-1 |
Covers familiarity with equipment, operator responsibilities, workplace conditions, and personal safety.
Details risks like electric shock, fumes, arc rays, fire, noise, and malfunction requiring expert help.
Details mains supply requirements, grid impact, and instructions for connecting the power source, including voltage selection.
Lists recommended fuse sizes and minimum cable areas for different mains voltages, and notes on generator power.
Explains how to change the mains voltage by reconfiguring the printed circuit board and ensuring correct earth connection.
Emphasizes reading safety regulations before use and securing the equipment on uneven ground.
Identifies and describes the main connections and control devices on the power source.
Provides a guide for diagnosing and resolving common faults such as no arc, interrupted current, overload trips, and poor welding performance.
To Next Page