Esatto EHPD80 - Quick Start and Drying Process; Quick Start Guide; After Washing Procedures

User Manual
12
QUICK START
CAUTION!
• Prior to using the dryer, ensure that it is correctly installed.
AFTER WASHING
The appliance will sound an alert and the display with show "00:00" after the drying cycle is complete.
NOTE!
The images in this user manual are for reference only. Your appliance may appear dierently.
DRYING START
The drum will rotate after the program starts. The cycle phase LED in the display will light up and the remaining
program time will be displayed.
DRYING END
1. The drum will stop rotating after the program ends. The display will show "0:00", also the cycle phase
LED showing "End" and related LED will illuminate. The dryer will start Anti-Crease function if user doesn't
remove the load.
2. Please press On/O button after unloading the tumble dryer to cut o power and pull out the plug.
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
Plug in Load laundry Close the door
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
Press On
Select desired
program
Select any
desired additional
programs
Press Start
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
Open the door
and take out
the laundry
Pull out the
container
Pour out the
condensate
water
Clean the lter Power o
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
OPERATION
12
After Drying
Drying
Buzzer beep and " :00"on display.0
1 2 3 4 5
open the door and
take out laundry
pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using, make sure the tumble dryer is installed correctly.
Note!
1
plug in
2
load
3
close the door
start
on
select program
select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
Before Drying
Operting Instructions (Continued)