Need help?Do you have a question about the Esatto ETL8 .1 and is the answer not in the manual?
Contact information and introduction to Residentia Group, the washing machine distributor.
Essential safety guidelines for appliance use, child supervision, and operating safety.
Instructions for unpacking the appliance and environmentally friendly disposal of packaging.
Diagram identifying the exterior and interior parts of the Esatto washing machine.
Recommendations for safe electrical connection, emphasizing a dedicated and grounded outlet.
Step-by-step instructions for correctly fitting the drain hose, including height and length limits.
Guide for connecting the water inlet hose to the tap and the machine's water inlet valve.
Comprehensive instructions and diagrams for connecting the water inlet pipe securely.
Essential steps to ensure the washing machine is ready for operation, including leveling and water supply.
A visual guide detailing the sequential steps from installation to starting a wash.
Instructions on selecting wash programs and understanding the end-of-cycle signals.
How to adjust water levels and select wash functions like Wash, Rinse, or Spin.
Instructions for activating the child lock and setting a delayed start time for washes.
Explanation of the Power, Program selection, and Water Temperature buttons.
Guide on how to start, pause, and resume the washing machine cycle.
A table outlining wash time, rinse time, spin time, and total time for each program.
A guide on how to perform a single wash cycle from loading to starting.
Details on the delay start, child lock, and automatic power off functions.
Explains imbalance adjustment, fuzzy logic operation, and power failure memory.
Advice on what to do after a wash cycle and routine exterior cleaning.
Procedures for cleaning the water inlet, lint, and drain pump filters.
Steps to take in an emergency, including shutting off power and contacting support.
Lists common faults like no water or no washing, with potential causes.
Explanations for specific error codes (E1-E5) and their resolutions.
A table detailing the size, power, weight, capacity, and pressure ratings of the appliance.
Sets out the terms and conditions for Residentia Group product warranties in Australia.
Details what is not covered by warranty and the procedure for making a claim.
General| Capacity | 8 kg |
|---|---|
| Maximum Spin Speed | 1400 RPM |
| Number of Programs | 16 |
| Weight | 70 kg |
| Loading Type | Front Load |
To Next Page
