630101_2_Manual_Propane_Conversion_US.doc
ST900 Direct Vent Gas Fireplace
Conversion Kit Manual
Propane for North America
Important:
The appliance shall be converted in accordance with;
• Local codes or, in the absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane
Installation Code, CSA B149.1
• A manufactured home (USA only) or mobile home OEM installation
must conform with the Manufactured Home Construction and Safety
Standard, Title 24 CFR, Part 3280, or, when such a standard is not
applicable, the Standard for Manufactured Home Installations
ANSI/NCSBCS A225.1, or Standard for Gas Equipped Recreational
Vehicles and Mobile Housing, CSA Z240.4
• Any other relevant statutory regulations.
• Must be installed by a qualified installer, service agency or gas supplier
• Converting this appliance for use with other gasses must be done by a
qualified installer, service agency, or gas supplier
Ce manual est disponsible en Français sur demande. www.escea.net
Manufactured By: Escea International Limited, 375b Green Valley Road, Griffen, GA 30224, USA. Ph: 866 615 3096 | info@escea.ne
To Next Page
Need help?
General
