To Next PageTo Next Page
Need help?Do you have a question about the Escea DF700 and is the answer not in the manual?
Overview of the Escea DF-Series gas fire, its features, and operation.
Step-by-step guide illustrating the sequence for installing the gas fire.
Detailed dimensions of the DF700 and DF960 appliances and required cavity openings.
Guidance on fitting DF gas fireplaces into existing masonry chimneys with minimum opening sizes.
Requirements for clearances to heat-resistant and heat-sensitive floors.
Minimum interior wall dimensions for creating a cavity in a corner.
Guidelines for decorative or protective hearths, including protrusion and material requirements.
Specifications for the cavity base support, levelling, and seismic restraint.
Instructions on wall lining installation and material considerations for false cavities.
Recommended minimum clearances for positioning the fire relative to side walls.
Guidelines for clearances for electrical equipment and mantels above the appliance.
Dimensions for Slim, Stretch, and Edge fascia types for DF700 and DF960 models.
Specifies required spacer dimensions for fascia flush with non-combustible floors or hearths.
Details for horizontal and vertical termination of flue systems under 4m.
Options for flue runs exceeding 4m, including DFS and DF models up to 12m.
Instructions for correctly orienting and sealing the horizontal power flue wall terminal.
Procedure for mounting the UVP fan unit externally for vertical flue systems.
Steps for installing the UVP fan unit internally within the roof space.
Installation guide for the kit enabling flexi flue in vertical masonry chimneys up to 6m.
Instructions for extending flue length to 12m using the extension kit.
Minimum clearances for fan-assisted wall terminals as per AS/NZS 5601.
Guidance on flue clearances to combustibles and securing flexible flue hoses.
Type of insulation required and installation method for flue wrapping.
Routing the electrical cable from the appliance to the power flue terminal.
Connecting the flexi flue to the spigot plate using hose band clamps.
Specifies the need for an earthed 230/240V connection accessible after installation.
Step-by-step procedure for safely removing the primary and secondary glass panels.
Instructions for detaching the burner tray and burner tube from the firebox.
Guidance on sizing gas pipes according to AS/NZS 5601 for adequate gas delivery.
Details the gas pipe entry point and the use of a silicone grommet.
Discourages the use of 9kg bottles as the main gas supply due to potential flame issues.
Initial steps for placing the appliance into the correctly framed cavity.
Procedure for pushing the appliance into the cavity and aligning the flue spigot plate.
Steps to remove the burner tray to access internal components like ignition leads.
Routing and connecting the power flue cable to the electronics tray.
Securing the appliance to the cavity base using provided holes and ensuring seismic restraint.
Connecting the gas supply pipe to the appliance regulator, ensuring flexibility for removal.
Recommendation to install a gas isolating valve prior to the fire for servicing.
Requirement for installers to provide a pressure test point before the appliance inlet.
Procedure for checking inlet and operating gas pressures using a manometer.
Guidance on identifying and resolving abnormal flame patterns.
Instructions for installing volcanic rock and traditional log fuelbeds.
Connecting the fireplace to a home automation system using a relay.
Instructions for correctly aligning and attaching the fascia to the appliance.
Factors to consider when choosing a location for the remote control's wall mount cradle.
Steps for activating the remote and starting the appliance for the first time.
Explains common sounds and initial smells during operation.
Procedures for cleaning the appliance glass safely.
Physical dimensions of the DFS730 freestanding unit.
Guidance on hearth use and clearances for the freestanding unit.
Minimum clearances for corner and wall installations of the freestanding unit.
Details on routing the gas pipe for the DFS730 unit.
Steps for installing the flue system for the freestanding unit.
Installation notes for the horizontal flue kit.
Procedure for installing the DF700 fireplace into the DFS730 freestanding unit.
Step-by-step guide for performing annual maintenance on the appliance.
Explanation of error codes displayed by the fire and suggested corrective actions.
Information on locating the appliance's serial number.
Reference to section E9 for checking gas operating pressure.
Methods for cleaning stainless steel and powder-coated fascias.
Instructions and jet/collar table for converting between Natural, Propane, and ULPG gas types.
Procedure for removing and cleaning the room air fan.
Steps to remove the electronic components tray for access.
Instructions for replacing the thermal cut-out (TCO) device.
Procedure for detaching and removing the pressure switch.
Steps for ordering a new remote and pairing it with the appliance.
Guidance on servicing the horizontal or vertical power flue fan unit.
Electrical schematic showing connections for the DF-Series G3 controller.
General| Brand | Escea |
|---|---|
| Model | DF700 |
| Category | Indoor Fireplace |
| Language | English |
