Need help?Do you have a question about the eschmann Little Sister SES 2010 and is the answer not in the manual?
Identifies risks like steam, high pressure, and hot surfaces.
Specifies approved load types and usage restrictions.
Covers earthing, RCD usage, and power disconnection.
Outlines safe practices for operation and cleaning.
Recommendations for professional installation and commissioning.
Instructions for unpacking and checking contents.
Guidelines for placing the autoclave.
Details on connecting the autoclave to power.
Navigation and interaction with the touch screen interface.
Using the keypad for data entry and input.
Visual indication of cycle progress and phases.
Types of messages indicating operational status or issues.
Role and responsibilities of the designated autoclave manager.
Requirements for water used in the reservoir.
Steps for filling the water reservoir correctly.
Guidelines for instrument placement.
Steps for securely closing the autoclave door.
Initiating a sterilization cycle.
Monitoring the cycle's progression.
Adjusting the drying phase of the cycle.
Procedures for unloading without the drying phase.
Procedures for unloading after the drying phase.
Method to safely abort an ongoing cycle.
Actions and considerations after stopping a cycle.
Procedure for draining the water reservoir.
Instructions for powering down the unit.
Daily cleaning and care instructions.
Steps for replacing the autoclave door seal.
Indications that the autoclave needs professional servicing.
Handling and resolving power interruption errors.
Actions for cycles stopped by the user.
Procedures for system-halted cycles.
General error handling and contact information.
How to choose and start a sterilization cycle.
Configuring a delayed start for cycles.
Accessing and modifying unit settings.
Setting the autoclave's current date and time.
Configuring audio alerts and notifications.
Managing user and manager PIN codes.
Adjusting the autoclave's security settings.
Accessing the service menu with a PIN.
Resetting the door seal counter.
Selecting which cycles are displayed.
Information about the autoclave model.
Description of user and manager security levels.
Appointing and responsibilities of the manager.
Points where PIN entry is mandatory.
Initial PIN configuration details.
Step-by-step guide to creating a new PIN.
Procedure to deactivate an existing PIN.
Navigating to the security level option.
Choosing between Low, Medium, or High security.
Instructions for installing the data logging software.
Steps for backing up cycle data to a PC.
How to open and view downloaded cycle log files.
Options and procedures for printing cycle data.
Performing daily automatic control tests.
Using TST indicators for routine cycles.
Constraints on load types, specifically unwrapped items.
Instructions for safely using the tray lifter.
Examples of instrument arrangements within the chamber.
Daily cleaning procedures and precautions.
Information on fuse replacement for the autoclave.
Information on fuse replacement for the mains cable.
Common faults and their recommended actions.
List and explanation of advisory codes and their solutions.
Continuation of the advisory code reference table.
Further continuation of the advisory code reference table.
Covers voltage, fuses, shock protection, pressure relief, environmental conditions.
Includes sterilisation time, pressure, drying, loads, dimensions.
Relevant standards, seal lifespan, sounds, safety features.
Altitude, pollution degree, other specs.
Autolog, TST Indicators, Logbook.
RO Water System, Standard and Half Trays.
HFIT Cassettes, Tray Lifter, Door Seal Kit.
Requirements for autoclave servicing by trained engineers.
Terms and conditions of the product warranty.
General| Category | Laboratory Equipment |
|---|---|
| Manufacturer | Eschmann |
| Sterilization Time | 3.5 - 15 min |
| Chamber Volume | 17 liters |
| Operating Temperature | 134°C |
| Model | SES 2010 |
To Next Page
