ESI 5 Series - Setting the Operation Mode; Setting the Programme

16
5.1.2 Pre-Set Temperatures: 7 Day
In 7 day setting, the pre-set settings are the same as the 5/2
Day programme.
5.1.3 Pre-Set Temperatures: 24 Hours
In 24hr setting, the pre-set settings are the same as Mon-Fri of
the 5/2 Day programme.
5.2 Setting the Operation Mode (5/2 day, 7 day, 24hr)
(ProG)
1. Press and hold
for 3 seconds until the display shows
tInE. Turn the dial until display shows ProG then press
.
2. Use the dial to move between 24hr, 7 day or 5/2 day
operation.
24 hr operation is shown by 24Hr.
7 day operation is shown by 7day.
5/2 day operation is shown by 5-2d.
3. Press
to set the programme (See section 5.3 for details)
or press
to return to previous menu or leave for 1
minute to automatically return to homescreen.
5.3 Setting the Programme (ProG)
5.3.1 5/2 Day
1. Choose 5/2 day operation (See section 5.2 for details).
Then press
.
2. Turn the dial to select the days to programme, either 1-5
for weekdays or 6-7 for weekends then press
.
3. Turn the dial to choose the program (P1-P6).
Then press
to enter time setting.
4. Turn the dial to adjust the time (10 minutes increments).
Then press
to enter temperature setting.
ESRTP5WIFI_User_instructions_AW.indd 16 17/06/2019 13:43