ESI 5 Series - Setting the Time and Date

2. Setting the time and date (tInE)
N.B. When first powered or in the event of a power loss the
time will be flashing and the time and date will need to be
set. In the event there is no Wi-Fi present the Time and Date can
be set by the following: Follow steps 2-6 to set the time on first
setup. Changes between summer and winter time are handled
automatically by the unit.
1. Press and hold
until the display shows tInE then press .
2. Turn the dial to adjust the hour then press
.
3. Turn the dial to adjust the minute then press
.
4. Turn the dial to adjust to the current day then press
.
5. Turn the dial to adjust to the current month then press
.
6. Turn the dial to adjust to the current year then press
.
7. Turn the dial to select between 12 or 24 hour format.
Press
to confirm and return to step 2. Press to return to
previous menu or leave for 1 minute to automatically return
to homescreen.
8
ESRTP5WIFI_User_instructions_AW.indd 8 17/06/2019 13:43