9
1.5m
3. Unscrew the cover that is protecting the live terminals.
Lift the cover to expose the wiring block, taking care to
retain the screw.
4. Complete the connections in accordance with the
wiring diagram (page 16).
5. Replace the thermostat onto the back plate, securing
the bottom of the thermostat first and clicking the
thermostat into place.
6. Insert the 2 x AA batteries provided in the battery
compartment on the front of the thermostat,
underneath the fascia. The Programmable Room
Thermostat is now installed and will automatically
start to control the room temperature according to
the factory pre-set programme as shown in the User
Instructions. The display shows the correct time and
date which is automatically set together with the
actual room temperature.
To Next Page
Loading...
