ESI RF BRIDGE User Guide DRAFT, rev 4
www.elec-solutions.com © 2013 Electronic Solutions, Inc. Page 12 of 13
Specifications
No serviceable parts are included.
Indoor Use in Dry Locations Only.
Ordinary Protection (not protected against harmful ingress of moisture).
USB power draw from the USB 5VDC Power Supply: 5VDC 1A max (<0.1A typical)
Operating Temperature
Range
+41°F to +95°F (+5°C to +35°C)
Transportation and
Storage Temperatures
0°F to +120°F (-18°C to +49°C)
ESI RF Bridge:
0.26 lb (0.12 kg)
ESI RF Bridge:
Width: 3.81 in (96.7 mm)
Height: 3.81 in (96.7 mm)
Depth: 0.93 in (23.6 mm)
External USB 5VDC power supply.
USB cable.
Interchangeable AC plugin adaptors (domestic and international).
ESI RF Bridge:
1. Disconnect power.
2. Unplug cable and power cord.
3. Wipe the device’s outside surface lightly with a clean, soft cloth dampened
with water.
Optional Remote Control:
1. Wipe the device’s outside surface lightly with a clean, soft cloth dampened
with water.
Safety Instructions
Also, see the Installer’s Manual & Instructions before using this product.
WARNING:
Important safety instructions. It is important for the safety of persons to follow these instructions. Save these
instructions.
Do not allow children to play with fixed controls. Keep remote controls away from children.
Frequently examine the installation for imbalance and signs of wear or damage to cables. Do not use if
repair or adjustment is necessary.
Please instruct the Operator to disconnect the external power supply, remove the plug of the power
supply cord of the external power supply from the AC Mains Outlet (or remove the wall-mount power
supply from the AC Mains Outlet): please ensure that the Mains Outlet is easily accessible for this
purpose.
To Next Page
Loading...
Need help?
General