Eskimo Eskape 2400 - Spreader Pole and Skin Attachment

8
Operator’s Manual
38200
|
Eskape™ 2400 Flip-Style Sled Shelter
Check for parts online at www.GetEskimo.com or call 800-345-6007
SPREADER POLE ATTACHMENT / SKIN ASSEMBLY
FIGURE 7
Assemble (33635/38584/33636) to #27821 and
#26536 using (2) 2-½ IN Philips drive bolts, (2) washers,
and (2) nuts.
NOTE: Tighten hardware.
7
SEE
DETAIL
FIGURE 8
(A) Attach #27730 to #38948 and (26539/38584)
as shown in Figure 8. Be sure to fully extend
(26539/38584) assembly until locked prior to
attaching #27730.
(B) Adjust height of #27730 until the (26539/38584)
assembly is tangent to the edge of #38948 as shown
in Figure 8.
8
#27730
(26539/38584)
ASSEMBLY
#38948
(33635/38584/33636)
ASSEMBLY
#26536
#27821
FIGURE 9
#27729
#36642
#36628
(36625/38584/36626)
ASSEMBLY
(36916/38584/36916)
ASSEMBLY
A
C
#27729
#36642
#36628
#26544
(36625/38584/36626)
ASSEMBLY
(36916/38584/36916)
ASSEMBLY
A
C
B
D
#27729
#36642
#36628
(36625/38584/36626)
ASSEMBLY
(36916/38584/36916)
ASSEMBLY
A
C
#27729
#36642
#36628
#26544
(36625/38584/36626)
ASSEMBLY
(36916/38584/36916)
ASSEMBLY
A
C
B
D