Celebrating over 30 years of excellence in manufacturing ultrasonic cleaning
equipment, electropolishing equipment and associated chemistries
ESMA, Inc.
P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919
To access the cycle time settings, select the program to be changed and press the
“System Settings” button on the top of the HMI interface. A password screen will
open. Your password to access this section is “450”. Use the subsequent screens
to make any necessary changes to the times of each cycle. Be aware that fill and
drain times should remain constant. This will assure that the same amount of rinse
water is drained and then re-filled into the Rinse Storage Tank. By pressing the
NEXT screen you will advance to subsequent screens.
A description of each step is as follows:
To Next Page
Loading...