15
Specifications
General
Power supply
Europe model . . . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz
U.S.A./Canada model. . . . . . . . . . . . . . . . AC 120 V, 60 Hz
Korea model . . . . . . . . . . . . . . . . . . . . . . AC 220 V, 60 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 W
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 kg (46 1/4 lbs)
External dimensions (W x H x D) . . . . . . . 445 x 108 x 420 mm
(17 1/2” x 4 1/4” x 16 9/16”)
Frequency response . . . . . . . . . . . . . . . . 2 Hz - 80 kHz, –3 dB
Signal-to-Noise Ratio (S/N) . . . . . . . . . . . . . . . . 118 dB (JEITA)
Dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . 112 dB (JEITA)
Total harmonic distortion . . . . . . . . . . . . . . . . 0.001% (JEITA)
Valid Sampling Frequency (kHz)
32, 44.1, 88.2, 176.4, 48, 96, 192, 48P(=46.08),
96P(=92.16), 192P(=184.32)
DSD (IEEE1394 or ES-LINK only)
Word Clock Frequency (input/output)
Normal mode . . . . . 44.1, 88.2, 176.4, 48, 96, 192, 100 (kHz)
4% down mode
48P(=46.08), 96P(=92.16), 192P(=184.32), 100P(=96) (kHz)
Input frequency range
WORD IN mode. . . . . . . . . . . . . . . . . . . . . . . . . . ±15 ppm
Rb IN mode is designed for extremely precise external
clocks like a rubidium clock generator.
Sampling frequencies corresponding to de-emphasis
32, 44.1, 48, 96 (kHz)
Input Terminals
Digital . . . . . . . . . . . . . . . . . . . . XLR x2, 5.0Vp-p±0.1V/110Ω
RCA x1, 0.5Vp-p±0.1V/75Ω
IEEE1394 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEEE1394 x2
WORD SYNC . . . . . . . . . . . . . . . . . . . . BNC x1, TTL level/75Ω
Output Terminals
Analog . . . . . . . . . . . . . . . . . . . RCA x1, 2.2Vrms±0.1V/10kΩ
XLR x1, 2.2Vrms±0.1V/10kΩ
WORD SYNC . . . . . . . . . . . . . . . . . . . . BNC x1, TTL level/75Ω
Accessories
Power cord x 1
Felt pads x 4
Warranty card x 1
Owner
’
s manual x 1
• Design and specifications are subject to change without
notice.
• Weight and dimensions are approximate.
• Illustrations may differ slightly from production models.
To Next Page
Loading...
